QUICK OVERVIEW
The A401 has a 2-pin connector. This is our standard sensor with the largest sensing area The dynamic range of this large force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
₹ 1,029.00
(inc GST)
The A401 has a 2-pin connector. This is our standard sensor with the largest sensing area: 25.4 mm (1 in.). A401 sensors are available in one force range: 111 N (0 – 25 lb).* The force ranges stated are approximations. The dynamic range of this large force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.
Measurement ranges of 0-1 lb and 0- 7000 lb are achievable with the A401 sensor by utilizing the recommended circuitry. The force range can be extended by reducing the drive voltage, VT, or the resistance value of the feedback resistor, RF. Conversely, the sensitivity can be increased for measurement of lower forces by increasing VT or RF
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
How to Adjust the Force Range:
* Measurement ranges of 0-1 lb and 0-7000 lb are achievable with the A401 sensor by utilizing the recommended circuitry. The force range can be extended by reducing the drive voltage, VT, or the resistance value of the feedback resistor, RF. Conversely, the sensitivity can be increased for measurement of lower forces by increasing VT or RF. For an alternative to the recommended circuit, see the Related Electronics tab.
Typical Performance:
Linearity (Error): < ±3% of Full Scale (Line drawn from 0 to 50% load)
Repeatability: < ±2.5% (Conditioned Sensor, 80% of Full Force Applied)
Hysteresis: < 4.5 % of Full Scale (Conditioned Sensor, 80% of Full Force Applied)
Drift: <5% / logarithmic time (Constant Load of 25 lb (111 N))
Response Time: < 5 µsec (Time required for the sensor to respond to an input force; Impact load – recorded on Oscilloscope)
Operating Temperature: -40°C – 60°C (-40°F – 140°F)*
* Force reading change per degree of temperature change = 0.36%/ºC (±0.2%/ºF)
Force Range
0-111N (0 – 11 Kg)
Connector
2-pin Male Square Pin
Length ( cm )
56.9 mm
Width (mm)
31.8
Thickness (mm)
0.203
Operating Voltage (VDC)
0.25 ~ 1.25
Max Current (A)
0.2
Drift
< 5% per logarithmic time scale
Hysteresis
< 4.5 % of full scale
Linearity (Error)
< ±3% of full scale
Pin Spacing (mm)
2.54
Repeatability
< ±2.5%
Response Time ( μS)
5
Sensing Area (mm)
25.4
Surface Layer
Polyester
Operating Temperature Range (°C)
-40 to 60
RoHS Compliant
Yes
Shipment Weight
0.01 kg
Shipment Dimensions
8 × 2 × 1 cm
Reviews
There are no reviews yet.